DMXking eDMX1 PRO

Compact and robust this single universe Ethernet DMX512 node suits a wide range of applications. With power supplied via a USB socket many power source options exist since almost any USB port or USB charger/power supply will work just fine including USB ports on many wireless routers. You choose 3-pin or 5-pin XLR so no inline adapters are required. Both DMX512 output and DMX512 input functions are supported along with E1.20 RDM. Designed and manufactured in New Zealand to the highest standards the eDMX1 is the perfect first step into DMX512 over Ethernet.

Frequently Asked Questions (FAQ) and Knowledge Base articles
Software Compatibility
Technical Support

Compatible with: Windows, Mac OS X, Linux, iOS (iPhone/iPad), Android

User Manuals/Downloads
Release Notes

User Manuals	eDMX1 PRO User Manual
Configuration Software	eDMX Configuration Utility - (Windows 7,8,10,11) eDMX Configuration Utility for MAC - v1.4(12) OS X 10.10+

eDMX Firmware Release Notes

Version	Description
2.9	Initial firmware release.
2.10	Merge fixes. DMX In fixes. Timeout for internal sources added.
2.14	ArtNet 4 support. DHCP + AutoIP. Merge engine improvements. RDM performance enhancements.
3.0	Record playback added. RDM enhancements. Universe Sync. IGMP report when universe change + unsolicited option. DMX IN Single IP.
3.1	ArtNet 4 NodeReport messages with BindIndex. NodeReport status messages. Dynamic IGMP reporting based on current port configurations.
3.3	Record/playback enhancements.
3.5	CR+LF no longer required on last script line. USB DMX assigned universe now follows Port A/B universe setting. Basic device configuration via USB (for USB devices).
3.6	Port A-D startup issues with eDMX4 PRO ISODIN resolved.
3.7	DMXworkshop excess ArtPoll bytes accepted. Full frame DMX512 option DMX-IN & DMX-OUT. Broadcast ArtNet playback over network. ArtPollReply includes UID report. ArtNet fail safe modes. NTP time sync and time zone with DST. DMX-IN & DMX-OUT re-mapping channel offset. Timeout all sources for DMX-IN. sACN CID fix for multiple DMX-IN ports on same universe. sACN Universe Sync enhancements. Recording from DMX-IN sources. Default Gateway added to ArtIpProg. Numerous Record/playback enhancements (see eDMX Recorder manual).
3.8	ArtPollReply message excess byte trimmed. Volume label report. End of show playback timing for improved show looping.
3.9	Improved merge source handling at end of show playback for seamless looping with merge. Master script final show entry now checks individual show script.
3.10	ArtPoll handling fix for Madrix.
3.12	Primary and alternate UDP port communication. Recorder triggers and diagnostics also run over alternate port. Enabled via Advanced menu item. Firmware listens for both ports all the time. Load/save YAML configuration in utility and TFTP, also optionally loaded at boot time from SD card. RDM functions when same universe configured on multiple ports. RDM Discovery PortID corrected to standard. Long RDM messages PDL 230-231 bytes now work properly. ArtCommand for YML support. Slight timing improvement for looped shows. More aggressive NTP requests upon power up to handle slower bootup of internet gateways. DMX-OUT channel offset improvements.
3.13	CRON tab entries expanded to 20. CRON run option to delay start until NTP response. Special feature request for 24hr long show skip ahead to current time upon start. Snapshot scene load/update from SD card upon startup. Snapshot write to SD card file.