DMXking eDMX2 PRO

Perfect middle ground when you need more than 1 universe but without the expense and bulk of 4 universe nodes. We've incorporated both Art-Net/sACN and USB DMX in the same unit along with a Power over Ethernet option making this the most flexible 2 universe node around. Built tough and compact the eDMX2 PRO takes little space in your bag and has both USB and PoE power options available. Mount an eDMX2 PRO closer to the rig and run Ethernet cable back to the controller using PoE power.

With USB DMX and ArtNet/sACN capabilities the eDMX2 PRO gives you the best of both worlds. Run USB DMX from your laptop or PoE Ethernet ArtNet as part of a larger rig or even merge USB DMX from another lighting application with your main system. eDMX2 PRO is the most flexible interface on the market.

Supporting both DMX512 output and DMX512 input individually configurable on each channel along with Art-Net and sACN protocols the eDMX2 PRO is the perfect choice for temporary small to medium rigs. DMX merge functionality works from both Art-Net/sACN, DMX Input and USB DMX sources providing plenty of configuration possibilities. Designed and manufactured in New Zealand to the highest standards.

DMXking eDMX2

Compatible with: Windows, Mac OS X, Linux, iOS (iPhone/iPad), Android

Power Options
  • USB Power adapter (not included)
  • POE injector (not included)
  • 802.3af compliant network switch
  • The high output USB port on the router, for example, Apple Airport Extreme (Airport Express doesn't provide enough current)
Configuration

All configuration options are stored in non-volatile memory on the device, so even if you need Windows/MacOSX for the configuration utility, you can still use this with other computers/devices once it's configured.

Supporting both Art-Net and sACN the eDMX2 is ideal for when you need a little more than the single universe eDMX1.
Main Features
  • Static IP or DHCP network addressing.
  • Supported operating systems: Any with Ethernet networking support. Windows, MAC OS, Linux, iOS, Android.
  • Fully compatible with USB DMX software suitable for ENTTEC USB Pro. Drivers for Windows, OS X, Linux.
  • 2x DMX512 Out or DMX512 In with Art-Net, sACN E1.31 and E1.20 RDM support
  • Merge 2 incoming Art-Net/sACN streams per output channel with both HTP and LTP options
  • Merge Art-Net/sACN + DMX input -> DMX output
  • Merge DMX input + USB DMX source -> DMX output
  • USB DMX enhanced mode for 2 Universe Out or 1 In 1 Out.
  • 1500V Isolation between every port.
  • Art-Net broadcast, Art-Net II, III & 4 unicast, sACN/E1.31 Multicast and sACN Unicast support.
  • E1.20 RDM over Art-Net support.
  • Universe Sync Art-Net, sACN and Madrix Post Sync.
  • User configuration of Art-Net Node short and long names.
  • Compact tough metal enclosure.
  • Available with 3 pin or 5 pin XLR socket, no adapter purchase required.
  • Accessory port (RJ12) for external show triggering and future add on devices.
  • Optional Power over Ethernet 802.3af compliant
  • etherCON for network connection.
  • External 5Vdc power input USB type B socket. Can be powered from computer USB port, USB charger unit, or PoE.
  • Fully compatible with ALL software and hardware that supports Art-Net I, II, 3 & 4 and sACN protocols.
  • Works with your existing console if Art-Net or sACN external nodes are supported.
  • Configuration utility (Win/OSX). Windows version required for basic Art-Net output/input test functionality and to manage SD playback/record functionality.
  • Recording and playback to microSD card (not included). See eDMX PRO Record / Playback manual.
  • Standalone show playback without computer or network connection.
  • Firmware updates can be performed by end user.
User Manuals
Configuration Software
Drivers

eDMX Firmware Release Notes

Version Description
2.9

Initial firmware release.
2.10

Merge fixes.
DMX In fixes.
Timeout for internal sources added.
2.14

ArtNet 4 support.
DHCP + AutoIP.
Merge engine improvements.
RDM performance enhancements.
3.0

Record playback added.
RDM enhancements.
Universe Sync.
IGMP report when universe change + unsolicited option.
DMX IN Single IP.
3.1

ArtNet 4 NodeReport messages with BindIndex.
NodeReport status messages.
Dynamic IGMP reporting based on current port configurations.
3.3

Record/playback enhancements.
3.5

CR+LF no longer required on last script line.
USB DMX assigned universe now follows Port A/B universe setting.
Basic device configuration via USB (for USB devices).
3.6

Port A-D startup issues with eDMX4 PRO ISODIN resolved.
3.7

DMXworkshop excess ArtPoll bytes accepted.
Full frame DMX512 option DMX-IN & DMX-OUT.
Broadcast ArtNet playback over network.
ArtPollReply includes UID report.
ArtNet fail safe modes.
NTP time sync and time zone with DST.
DMX-IN & DMX-OUT re-mapping channel offset.
Timeout all sources for DMX-IN.
sACN CID fix for multiple DMX-IN ports on same universe.
sACN Universe Sync enhancements.
Recording from DMX-IN sources.
Default Gateway added to ArtIpProg.
Numerous Record/playback enhancements (see eDMX Recorder manual).
3.8

ArtPollReply message excess byte trimmed.
Volume label report.
End of show playback timing for improved show looping.
3.9

Improved merge source handling at end of show playback for seamless looping with merge.
Master script final show entry now checks individual show script.
3.10

ArtPoll handling fix for Madrix.
3.12

Primary and alternate UDP port communication. Recorder triggers and diagnostics also run over alternate port. Enabled via Advanced menu item. Firmware listens for both ports all the time.
Load/save YAML configuration in utility and TFTP, also optionally loaded at boot time from SD card.
RDM functions when same universe configured on multiple ports.
RDM Discovery PortID corrected to standard. Long RDM messages PDL 230-231 bytes now work properly.
ArtCommand for YML support.
Slight timing improvement for looped shows.
More aggressive NTP requests upon power up to handle slower bootup of internet gateways.
DMX-OUT channel offset improvements.
3.13

CRON tab entries expanded to 20. CRON run option to delay start until NTP response. Special feature request for 24hr long show skip ahead to current time upon start. Snapshot scene load/update from SD card upon startup. Snapshot write to SD card file.