DMXking eDMX4 MAX

Need more universes? eDMX4 is the answer you've been looking for. Built tough with plenty of mounting options the eDMX4 fits nicely in your lighting rig by simplifying cable runs and eliminating the need for DMX distribution amplifiers/splitters. Mount an eDMX4 closer to the rig and run Ethernet cable back to the controller and better still power the eDMX4 right back at the controller up to 70m / 210feet away using Power over Ethernet.

Supporting both DMX512 output and DMX512 input individually configurable on each channel along with Art-Net and sACN protocols the eDMX4 is an ideal choice for universe hungry lighting rigs. The flexible configuration permits 2 input DMX merge functionality too. Designed and manufactured in New Zealand to the highest standards.

Compatible with: Windows, Mac OS X, Linux, iOS (iPhone/iPad), Android

Manufacturer part number: 0134-1.0

  • Static IP or DHCP network addressing.
  • Supported operating systems: Any with Ethernet networking support. Windows, MAC OS, Linux, iOS, Android.
  • Tough metal enclosure with multiple mounting options
  • Available with 3pin or 5pin Neutrik XLR socket options
  • eDMX4 MAX - 4x DMX512 Out or DMX512 In with Art-Net, sACN E1.31 and E1.20 RDM support
  • Merge 2 incoming Art-Net streams per output channel with both HTP and LTP options
  • Merge Art-Net + DMX input -> DMX output(s)
  • Merge 2x DMX input -> DMX output(s)
  • sACN Priority takeover for multi-tier controller arrangements
  • Mix and match ArtNet with sACN merge/priority sources
  • 1500V Isolation between every port
  • E1.11 Higher Protection Level “DMX512-A Protected” device.
  • Power over Ethernet 802.3af compliant and etherCON for network connection. Alternative power via USB-C.
  • Fully compatible with ALL software and hardware that supports Art-Net I, II, 3 & 4 and sACN protocols.
  • Works with your existing console if Art-Net or sACN external nodes are supported.
  • Universe Sync Art-Net, sACN and Madrix Post Sync.
  • Recording and playback to microSD card (not included). See eDMX PRO Record / Playback manual.
  • Standalone show playback without a computer or network connection.
  • Configuration utility (Win/OSX) with basic Art-Net output/input test functionality (Win only).
  • Firmware updates can be performed by the end user.

eDMX MAX Firmware Release Notes

Version Description
4.0

Initial release. RDM support disabled.

4.1

Improved port LED intensity. Fixed startup hang with certain SD cards. Support for eDMX1 MAX.

4.2

DMX-IN recording issue fix. ArtNet subnet broadcast traffic issue fix – resolves problem with being unable to scan for (L)eDMX MAX units.

4.3

Initial release with USB DMX support.

4.5

Extensions to DMXking USB DMX protocol. Required update for USB DMX functionality.

4.6

Art-Net TimeSync. ArtPollReply changed to single universe per message. Art-Net RDM functionality enabled. DMX512 timing parameters adjustable. Art-Net UDP Port adjustable. Art-Net RDM Controller optional fixed IP and adjustable UDP Port. Diagnostics messages priority enhancements. Initial support for eDMX8 DIN MAX.

4.7

SD card detection improvements.