DMXking ultraDMX2

The ultimate USB DMX box with more features than anything else on the market. From basic Enttec Pro compatibility mode right through to full on Art-Net/sACN, we've got everything covered including standalone show playback of any complexity and duration.

Supporting both DMX512 output and DMX512 input individually configurable on each channel along with Art-Net and sACN protocols the ultraDMX2 PRO is the perfect choice for small to medium rigs. DMX merge functionality works from both Art-Net/sACN, DMX Input and USB DMX sources providing plenty of configuration possibilities. Designed and manufactured in New Zealand to the highest standards.

DMXking ultraDMX2

Compatible with: Windows, Mac OS X, Linux, iOS (iPhone/iPad), Android

Power Options
  • USB Power adapter not included
  • High output USB port on the router, for example, Apple Airport Extreme (Airport Express doesn't provide enough current)
Configuration

All configuration options are stored in non-volatile memory on the device. The device can be controlled by any operating system supporting ArtNet/sACN. For changing configuration options there's a Windows and OS X utility available. The ultraDMX2 PRO is set up for plug and play operation using DHCP from a factory, in most scenarios you can just hook it up to great software like Luminair and start using it right away, no need to use the configuration utility.

Supporting both Art-Net and sACN the ultraDMX2 is ideal for when you need a little more than the single universe eDMX1, but don't need PoE which is available on the eDMX2. The ultraDMX2 is also a great replacement for the discontinued RDM PRO product as it supports the same features.

Main Features
  • Static IP or DHCP network addressing. Ships with DHCP enabled.
  • Fully compatible with software suitable for ENTTEC USB DMX Pro. Drivers for Windows, OS X, Linux.
  • 2x DMX512 Out or DMX512 In with Art-Net, sACN E1.31 and E1.20 RDM support.
  • DMX512 Out or DMX512 In functionality selectable on each port.
  • Merge 2 incoming Art-Net/sACN streams per output channel with both HTP and LTP options.
  • Merge Art-Net/sACN + DMX input -> DMX output.
  • Merge DMX input + USB DMX source -> DMX output.
  • USB DMX enhanced mode for 2 Universe Out or 1 In 1 Out.
  • 1500V Isolation between every port.
  • Art-Net broadcast, Art-Net II, III & 4 unicast, sACN/E1.31 Multicast and sACN Unicast support.
  • E1.20 RDM over Art-Net support.
  • Universe Sync Art-Net, sACN and Madrix Post Sync.
  • User configuration of Art-Net Node short and long names.
  • Compact tough metal enclosure.
  • Available with 3 pins or 5 pin XLR sockets.
  • Accessory port (RJ12) for external show triggering and future add-on devices.
  • Fully compatible with ALL software and hardware that supports Art-Net, Art-Net II, III & 4, and sACN protocols.
  • Fully compatible with lighting consoles capable of generating Art-Net or sACN protocol.
  • Configuration utility (Win/OSX) with basic Art-Net output/input test functionality (Win only).
  • Recording and playback to microSD card (not included). See eDMX PRO Record / Playback manual.
  • Standalone show playback without the computer or network connection.
  • Firmware updates can be performed by the end user.

eDMX Firmware Release Notes

Version Description
2.9

Initial firmware release.

2.10

Merge fixes, DMX In fixes, Timeout for internal sources added.

2.14

ArtNet 4 support, DHCP + AutoIP, Merge engine improvements, RDM performance enhancements.

3.0

Record playback added, RDM enhancements, Universe Sync, IGMP report when universe change + unsolicited option, DMX IN Single IP

3.1

ArtNet 4 NodeReport messages with BindIndex, NodeReport status messages, Dynamic IGMP reporting based on current port configurations.

3.3

Record/playback enhancements.

3.5

CR+LF no longer required on last script line, USB DMX assigned universe now follows Port A/B universe setting, basic device configuration via USB (for USB devices).

3.6

Port A-D startup issues with eDMX4 PRO ISODIN resolved.