DMXking eDMX4ISODIN PRO

Designed for DIN rail cabinet installations in tough electrical environments. eDMX4 PRO ISODIN provides ANSI E1.11 Higher Protection Level on all DMX512-A ports so they'll survive high voltage transients and other unusual line conditions. Port protection is identical to the highly reliably eDMX4 PRO product.

Supporting both DMX512 output and DMX512 input individually configurable on each channel along with Art-Net and sACN protocols the eDMX4 PRO ISODIN is an ideal choice for universe hungry lighting installations. Flexible configuration permits 2 input DMX merge functionality too. Designed and manufactured in New Zealand to the highest standards. DIN rail mounting included.

DMXking eDMX4ISODIN

Compatible with: Windows, Mac OS X, Linux, iOS (iPhone/iPad), Android

Configuration

All configuration options are stored in non-volatile memory on the device, so even if you need Windows/MacOSX for the configuration utility, you can still use this with other computers/devices once it's configured.

Supporting both Art-Net and sACN the eDMX4 is ideal for when you need the top-of-the-line DMX512 node with support for 4 universes.
Main Features
  • Static IP or DHCP network addressing.
  • Supported operating systems: Any with Ethernet networking support. Windows, MAC OS, Linux, iOS, Android...
  • eDMX4 PRO ISODIN - 4x DMX512 Out or DMX512 In with Art-Net, sACN E1.31 and E1.20 RDM support
  • Merge 2 incoming Art-Net streams per output channel with both HTP and LTP options
  • Merge Art-Net + DMX input -> DMX output(s)
  • Merge 2x DMX input -> DMX output(s)
  • sACN Priority takeover for multi-tier controller arrangements
  • Mix and match ArtNet with sACN merge/priority sources
  • 1500V Isolation between every port
  • DIN Rail mounting
  • E1.11 Higher Protection Level “DMX512-A Protected” device.
  • Fully compatible with ALL software and hardware that supports Art-Net I, II, 3 & 4 and sACN protocols.
  • Works with your existing console if Art-Net or sACN external nodes are supported.
  • Universe Sync Art-Net, sACN and Madrix Post Sync.
  • Recording and playback to microSD card (not included). See eDMX PRO Record / Playback manual.
  • Standalone show playback without computer or network connection.
  • Accessory port for external show triggering and future add on devices.
  • Configuration utility with basic Art-Net output/input test functionality.
  • Firmware updates can be performed by end user.
User Manuals
Configuration Software

eDMX Firmware Release Notes

Version Description
2.9

Initial firmware release.
2.10

Merge fixes.
DMX In fixes.
Timeout for internal sources added.
2.14

ArtNet 4 support.
DHCP + AutoIP.
Merge engine improvements.
RDM performance enhancements.
3.0

Record playback added.
RDM enhancements.
Universe Sync.
IGMP report when universe change + unsolicited option.
DMX IN Single IP.
3.1

ArtNet 4 NodeReport messages with BindIndex.
NodeReport status messages.
Dynamic IGMP reporting based on current port configurations.
3.3

Record/playback enhancements.
3.5

CR+LF no longer required on last script line.
USB DMX assigned universe now follows Port A/B universe setting.
Basic device configuration via USB (for USB devices).
3.6

Port A-D startup issues with eDMX4 PRO ISODIN resolved.
3.7

DMXworkshop excess ArtPoll bytes accepted.
Full frame DMX512 option DMX-IN & DMX-OUT.
Broadcast ArtNet playback over network.
ArtPollReply includes UID report.
ArtNet fail safe modes.
NTP time sync and time zone with DST.
DMX-IN & DMX-OUT re-mapping channel offset.
Timeout all sources for DMX-IN.
sACN CID fix for multiple DMX-IN ports on same universe.
sACN Universe Sync enhancements.
Recording from DMX-IN sources.
Default Gateway added to ArtIpProg.
Numerous Record/playback enhancements (see eDMX Recorder manual).
3.8

ArtPollReply message excess byte trimmed.
Volume label report.
End of show playback timing for improved show looping.
3.9

Improved merge source handling at end of show playback for seamless looping with merge.
Master script final show entry now checks individual show script.
3.10

ArtPoll handling fix for Madrix.
3.12

Primary and alternate UDP port communication. Recorder triggers and diagnostics also run over alternate port. Enabled via Advanced menu item. Firmware listens for both ports all the time.
Load/save YAML configuration in utility and TFTP, also optionally loaded at boot time from SD card.
RDM functions when same universe configured on multiple ports.
RDM Discovery PortID corrected to standard. Long RDM messages PDL 230-231 bytes now work properly.
ArtCommand for YML support.
Slight timing improvement for looped shows.
More aggressive NTP requests upon power up to handle slower bootup of internet gateways.
DMX-OUT channel offset improvements.
3.13

CRON tab entries expanded to 20. CRON run option to delay start until NTP response. Special feature request for 24hr long show skip ahead to current time upon start. Snapshot scene load/update from SD card upon startup. Snapshot write to SD card file.